In the development of fasteners, there is often a type of fastener at the connection point of soft and hard pipes. This fastener is called a throat clamp. In our current technology, the throat clamp is used when small-diameter soft and hard pipes are connected and dead corners are prone to occur, resulting in leakage of liquids and gases. After understanding its basic characteristics, let's take a look together at the connection process of the stainless steel throat clamp.
To solve the problem of dead corners and leakage of liquids and gases when the throat clamp is used for small-diameter soft and hard pipe connections in the existing technology, this throat clamp adopts an open inner and outer ring structure and is fastened with bolts. This throat clamp effectively solves the problem of dead corners and leakage of liquids and gases when connecting small-diameter soft and hard pipes, and has a simple structure, easy to manufacture, and a cost of 30% of the original product. This throat clamp is widely used in machine components such as vehicles, petrochemicals, pharmaceuticals, food and wine, sewage treatment, purification, dust removal, and automotive parts.
Characteristics of the throat clamp: The worm gear friction force is small, especially suitable for high-end vehicle models or parts with anti-corrosion materials. The applicable range of the throat clamp is particularly wide, with good torsional and pressure resistance. The throat clamp has balanced torsional torque and a firm locking, is very tight, has a wide adjustment range, and is suitable for fastening soft and hard pipes with a diameter of 30mm or more. The appearance of the assembled throat clamp looks particularly beautiful.
The connection process of the stainless steel throat clamp: Use a pipe cutting machine to cut the pipe according to the required length. The cutting edge should be smooth, and the end face of the cutting edge should be perpendicular to the axis of the pipe. If there are burrs at the cutting edge, use sandpaper, files, or sanding machines to polish.
The editor suggests using the pipe cutter of the threading machine for pipe cutting. Its advantage is that the end face of the pipe is vertical and smooth, with few burrs. When cutting the pipe with a conventional toothless saw, due to factors such as the uneven end face of the saw blade when it leaves the factory, excessive force, and the rotation of the pipe, it is prone to cause the pipe section to be misaligned and have many burrs.
The above article is the summary of Tianjin throat clamps, Tianjin throat clamp factory, and Tianjin couplings. If you want to know more, please click our website: http://www.tjfengjiang.com/